Pulverizer Extruder Accessories Project
Tianjin Haid Feed Co., Ltd of Haid Group
Tianjin Haid Feed Co., Ltd of Haid Group ordered two sets of SWFL150 pulverizer with main motor power of 160kw in January,2016. They were installed in May and accepted on 3nd July,2016.
Feed type：grass carp feed
Fineness: 82.6% pass 80 mesh
Capacity: 7.31 t/h
【NEW XIN YUAN】Xin Yuan technical service personnel inspected and maintained the equipment from outside to inner structures in the local workshop.
Main body of pulverizer: no abnormalities of appearance; running stably with low noise.
Discharge device of foreign objects: normal adjust for air supplement door
Air duct system: no air leak; no material block; reasonable design for bent duct
Pulse dust collector: no abnormalities with equipment; no air leak
Pulse solenoid valve: normal operation and no looseness of rubber which connect the solenoid valve
Gear ring, hammer, wear-resistant plate: normal
Impeller classifier:normalwithout any sticky materials
Settling chamber: a few of residuum
Belt of pulverizer:normal belt tightness
Convey hinge of reduction gears: loosen and oil starvation
Coupling: no fracture or looseness
Dust bags: material sticking
Air cylinder: no ponding
【NEW XIN YUAN】After a series of inspection and maintaining, we give some suggestions as below:
1．Clean the inner structure of pulverizer timely. Adjust the air supplement door properly according to feed.
2. Check the process of pulverizer, pulse dust collector and flexible connection of solenoid valve on schedule. Pay attention to the pressure and ponding condition of pulse air cylinder.
3. The test of fineness should according to strict standard of quality control.
4. Technologist should inspect the inner structure and working processing every day. Check whether the rough grinding sieve is broken or not and keep record.
Our quality assurance & inspection completedsuccessfully. We appreciate Tianjin Haid Feed Co., Ltd of Haid Group forsupporting and communication with us. We will always at your service.